Recently Updated Pages

Introducing the Red Sea, an all analog signal routing matrix designed for countless stereo and mo...

  Wet Dry Wet Wiring   Stereo Parallel FX Loop Wiring

The Red Sea can be wired in many different ways but before we dig into each wiring diagram let's ...

The Blend knob can be used to blend the volume/mix between two parallel effects loops. For instan...

The polarity switches can be a very useful and powerful tool, not only to phase correct your ster...

To enter "Preset Save Mode", press and hold both the Bypass and Preset switch for longer than 2 s...

Any standard 9V negative tip power supply will work with MR JAX, just make sure your power supply...

The Mid Boost is designed to jump you straight into lead territory no matter which Gain Stage you...

The Gain Knob is directly tied to the Gain Staging and the Gain Staging takes precedence over the...

When MR JAX is engaged, perform a double press to activate the Mid Boost. Once the Mid Boost is e...

When MR JAX is dis-engaged, perform a long press (press and hold for at least a half of a second ...

When MR JAX is first powered on the indicating LED will begin to flash. Hold down the Bypass Swit...

Level Knob Controls the overall output level of MR JAX. Typically set to unity gain when the ped...

Introducing MR JAX, our first pedal in a new series called the "Signature Series". Our first offi...

When the pedal first powers on it fires up in the 25% Gain Stage (adjustable in global settings),...

The MCX connects to your Mac/PC with a USB 2.0 to Mini-B cable Open the web app and plug the M...

Introducing the Lion, a 100% all analog signal path, programmable distortion pedal with onboard p...

The Lion has three different circuits which offer different levels of compression and clarity. By...

The tone stack of the Lion offers complete flexibility for maximum tone shaping. With both a low ...