Recently Updated Pages

Changing the MIDI Channel

From the factory the Revelation is set to receive Midi messages on Midi channel 1, however this c...

Saving Presets Via MIDI

You have two options for creating presets. The first option is to use a "smart" midi controller t...

Program Change Messages

Receiving PC messages will recall the onboard presets stored within the Revelation. PC #0 - Re...

How to Connect

Midi communication to the Revelation conforms to the specification for TRS to Midi adapters issue...

Saving Presets

To enter "Preset Save Mode", press and hold both the Bypass and Preset switch for longer than 2 s...

Using the Pedal

Mix Knob The mix knob controls the overall blend between the wet and dry signal. Fully countercl...

Description

The Revelation V2.0 builds on the ever popular Revelation Reverb. Upgrades include true stereo in...

Control Change Messages

Receiving CC messages will control the individual controls, knobs, and switches of the Revelation...

Can I use the Revelation in Mono?

Yes, using the L input and the L output will run the Revelation in mono. Anytime you plug into th...

Does the Revelation go 100% wet?

Yes, the mix knob ranges from 0 (100% dry) to 100% wet.

Why is my Revelation not responding to MIDI messages?

Currently there are multiple types of wiring options for cables and connectors. We comply to the ...

Are there reverb trails when switching between presets?

When switching between modes (Live or Preset) or switching between presets, the pedal automatical...

How many presets can I save on the pedal?

The Non-Midi Revelation can save 3 presets onboard. The first three presets can be saved by using...

Why is my Revelation acting funny when I plug it in?

If you're Revelation is making a funny noise or the LEDs are flashing white, it is likely that yo...

Green Bank (Looper Mode)

The green bank is dedicated to using the looper within the HX Stomp. Remember, in order to use th...

Can I Update the Software on my Old Micro?

Yes, currently we only have a solution for Windows users, however please check back as we are wor...

Setting Up Your HX Stomp

Let's take a moment and setup your HX Stomp to work with the Micro... On the Stomp, press <...

Will my Old Micro Still Work with the New HX 3.0 Update?

Most definitely! Just remember when you upgrade your HX Stomp, it resets its global settings so y...

Always Active Tap Tempo

For detailed information about this feature and how it works, please visit the Description page. ...

Turning Off Double Press

In order for the Micro to tell the different between a single press and a double press, there is ...