Eternity Delay

Introducing the Eternity Delay- our most sophisticated design to date. The Eternity Delay is eng...

The Eternity has 6 studio grade algorithms to choose from. Below details the sounds for each algo...

To enter the Global Settings, hold down the Bypass switch when power is first applied to the peda...

Power the Eternity with a 9v DC negative tip power supply, one that is capable of handling up to ...

Saving a preset is simple and quick. Cue up the current preset location you’d like to save a pres...

Midi communication to the Eternity conforms to the specification for TRS to Midi adapters issued ...

From the factory the Eternity is set to receive Midi messages on Midi channel 1, however this can...

You have two options for creating presets. The first option is to use a "smart" midi controller (...

Receiving PC messages will recall the onboard presets stored within the Eternity. PC #0 - Will...

Receiving CC messages will control the individual controls, knobs, and switches of the Eternity. ...

The Eternity requires a 9 volt DC negative tip power supply that is rated for at least 300mA of c...

The Eternity can store up to 127 presets on the pedal. The first six presets can be created and s...

The Eternity can be used with any board/setup including mono, stereo, or stereo inputs with sum t...

No it doesn’t, however the Eternity will receive BPM information via MIDI clock signals.

When switching between modes (Live or Preset) or switching between presets, the pedal automatical...

Most often, noise issues are related to the power supply feeding the Eternity. The first thing to...