# Setting Up Your HX Stomp Let's take a moment and setup your HX Stomp to work with the Micro... - On the Stomp, press <Page and Page> simultaneously to open the menu - Press Page> and then press Knob 1 (Global Settings) [![Global-Settings.PNG](https://docs.jetpedals.com/uploads/images/gallery/2020-11/scaled-1680-/usMhdOVdBwNDLlUg-Global-Settings.PNG)](https://docs.jetpedals.com/uploads/images/gallery/2020-11/usMhdOVdBwNDLlUg-Global-Settings.PNG) - Turn the Upper Knob to select the Footswitches menu - Turn Knob 2 and assign FS3 function to Stomp 3 (this is only needed if you want to use fs3 as a stomp switch, you can choose not to do this step if you want to leave fs3 as tap/tuner \*\*\*\* IF PURCHASED AFTER 4.24.21 SKIP THE NEXT TWO INSTRUCTIONS AND PROCEED TO MIDI/Tempo BELOW \*\*\*\* - - Turn Knob 3 and assign FS4 function to Preset Down - Press Page> and assign FS5 function to Preset Up [![Footswitches.PNG](https://docs.jetpedals.com/uploads/images/gallery/2020-11/scaled-1680-/xtQ2ASf4eWN0VwaE-Footswitches.PNG)](https://docs.jetpedals.com/uploads/images/gallery/2020-11/xtQ2ASf4eWN0VwaE-Footswitches.PNG) - Turn the Upper Knob to select the MIDI/Tempo menu - Turn Knob 1 and confirm MIDI Base Channel is set to 1 [![MIDI.PNG](https://docs.jetpedals.com/uploads/images/gallery/2020-11/scaled-1680-/kr68gQ1yX7S5d9hF-MIDI.PNG)](https://docs.jetpedals.com/uploads/images/gallery/2020-11/kr68gQ1yX7S5d9hF-MIDI.PNG) - That's it! You are all setup to start using the Micro