Getting Started

Instructions for setting up your HX Stomp to use with the JET Micro

• Setting Up Your HX Stomp

Setting Up Your HX Stomp

Let's take a moment and setup your HX Stomp to work with the Micro...

• On the Stomp, press <Page and Page> simultaneously to open the menu
• Press Page> and then press Knob 1 (Global Settings)
  
• Turn the Upper Knob to select the Footswitches menu
  • Turn Knob 2 and assign FS3 function to Stomp 3 (this is only needed if you want to use fs3 as a stomp switch, you can choose not to do this step if you want to leave fs3 as tap/tuner

**** IF PURCHASED AFTER 4.24.21 SKIP THE NEXT TWO INSTRUCTIONS AND PROCEED TO MIDI/Tempo BELOW ****

• • Turn Knob 3 and assign FS4 function to Preset Down
  • Press Page> and assign FS5 function to Preset Up
    
• Turn the Upper Knob to select the MIDI/Tempo menu
  • Turn Knob 1 and confirm MIDI Base Channel is set to 1
    
• That's it! You are all setup to start using the Micro