Controlling External MIDI Pedals

For detailed information about this feature and how it works, please visit the Description page.

To enable or disable this feature, turn power off and back on to the Micro. While the Micro is in the startup phase (blinking LED's) press down button A and continue to hold it down. Once you are in the global settings (the LED will either be solid green or red) pressing button C will toggle the LED between red and green. If the LED is green, this feature is enabled, if red, this feature is disabled. Once you have reached your desired setting, simply release button A and the Micro will save your settings into permanent memory and exit the global settings.


Revision #2
Created Fri, Nov 6, 2020 8:38 PM by Junior Thomason
Updated Fri, Nov 6, 2020 8:48 PM by Junior Thomason